Custom sized pediments with acorns for doors and windows by Imperial 1-800-399-7585 for historic restorations

Now you know about the details select a PDF Fill in Form 1) click the Pic to Download the form 2) Fill it in and save it 3) Email it to us for a Quote

Replacement Options

Solutions to your Rotted Pediment
If your pediment is totally rotted - it is time to replace it Imperial provides two solutions 1) duplicate the pediment exactly how as it is now Made from a non-wood composite ArchPolymerTM 2) take a standard model and modify it to your size requirements - a less expensive option

Custom Services

Design Process

CAD or Concept Drawings to New Creation is Required

Imperial Productions is a Design House offering custom designs and historic reproductions of architectural creations for the exclusive home or commercial offices and hospitality buildings.

You Supply a CAD Drawing

We will provide a custom quote as per your CAD drawing & details

Include Elevations / Plan Views / Section Highlights

A full quote will be provided. If you have Photos, Renderings or broken

parts they are helpful for design clarity

Photo or Rendering Supplied Only

From a photo we can provide an approximate budget price

This price does not constitute a firm quote

For a firm quote we require a CAD drawing and details

If you do not have CAD drawing Imperial can be commissioned for

design services that include Elevations / Plan Views / Section Highlights

The cost of the CAD drawings will be quoted and can be applied to the

production the commission

Unique Designs

Concept Drawings to New Product Send us CAD drawings for a quote

Historic Reproductions

Send us Photos of the broken pediment, historic photos of a former pediment, or drawings

of the pediment with measurements specific Width, Depth, Height

Size Variances

An Existing Model Made Bigger or Smaller

We can take one of our standard models and modify it to a different size or variation

In this case the bottom width was made wider without a frieze board

Attention to Details
	There are a few points that should be considered A) Specify how large the frieze board is B) Specify the rise of the radius sunburst C) Specify the number of rays in the sun design D) Specify the depth

Materials

HARDWOODS

For Historic accuracy Imperial can produce an exact duplicate of your existing pediment in

Hardwood both carved and milled. You cannot use interior woods such as Poplar outside.

In fact. we discourage you from using Poplar or Basswood as it is too hairy and absorbent when

painting or staining.

Exterior Woods include:

Knotty Pine: Shellac the knots before painting

Clear Pine: Some knots but small

Western Red Cedar: Soft but Rot resilient

White Oak: Extremely Hard

Interior Wood Selection:

Cherry, Walnut, Red Oak, Maple, Alder, Knotty Pine, White Oak etc

All are custom priced

ArchPolymerTM
ArchPolymerTM is a synthetic composite material. It is rot, water, and insect resistant. You can cut it like wood, screw into it. They are primed white. The backs are often hollow but the walls are thick. Solid back is an option
INSTALLATION NOTES To install an ArchPolymerTM pediment use our construction adhesive on the back. If the substrate is brick use Tapcons by predrilling holes for the screws. If the substrate is stucco or siding use long - preferably no rust nickel screws and cover the countersunk head with our spackling compound.
Click for Material Properties

ArchPolymerTM Optional Textures

GRG-NeoPlasterTM

Any of our models are available in GRG-NeoPlasterTM for interior use only

It is a Light Weight Alpha Gypsum strong enforced plaster material

that meets Class A or ASTM-E84 fire codes.

It is 2-3lbs per sq foot for interior architectural elements.

Simply tape and mud the pediment to a wall above a door. They are supplied hollow but can be

special ordered with solid backs Select your model and we can quote it for you

Examine our extensive standard line of medallions @ imperialfacades.com

click for GRG-NeoPlaster Material Properties

GFRC-ZeamentTM

a Cement Composite

Pediments can be custom made in GFRC-ZeamentTM for exterior use

ZeamentTM is a lite weight composite consisting of Portland Cement, sand, aggregates,

alkali resistant fiber, polymer, adhesives and water.

Glass fibers re-enforce the product resulting in a stronger material than normal

concrete. ZeamentTM is a 1/2" thick laminate re-enforced with steel and usually installed by drywall,

millwork and masonry contractors.

It is lightweight enough to reduce the amount of structural steel required for a building, much less

than 40lbs per square foot for

precast concrete yet strong enough to be used in hurricane and earthquake zones.

GFRC can be used for columns, cornice, frieze,

wall panels, domes, finals, pediments balustrades and more.

ZeamentTM can be supplied

1) Smooth paint grade finish

2) Internally pigmented in 12 colors

3) Sandblasted to achieve the look of stone

click for GFRC Zeament Material Properties

Finishing Options

REAL METAL COATING
	All of our Pediments can be metal coated in real metal Select from bronzes, silvers, golds, coppers for a special look. Suited well for the discerning client or commercial endeavor
ARTISAN PAINTING AND STAINING SERVICE
	All of our Pediments can be ordered Commercially Painted or in the case of Hardwood - stained and clear coated Select from our many historical colors of paints or specify your brand and number

Custom Procedures

Quotes - send us forms and photos
Info	A Quote will be provided prior to accepting an order Provide us with your Ship to & Bill to Address All orders are paid in full prior to production
Email	email: sales@imperialproductions.com
Fax	1-888-244-1083 or 416-264-6098

Acceptance of the Quote
Submit Payment	For Custom Orders Full payment is required 1) Money Orders 2) Company Checks 3) Money Wire Transfers We do not accept Cash or Credit Card on Custom Orders
Review our Terms	click for=> Imperial Sales Policy All custom orders cannot be cancelled for any reason
Timing	Once Accepted, Timing starts from the time you sign the shop drawings not the Quote Date
Responsibility:	Once you accept the quote and sign off on the shop drawings, the custom product(s) will be made to the closest measurements that manufacturing allows (providing for manufacturing tolerances) Shop drawings are made as a courtesy for detail confirmations. They must be signed back within 10 days or production begins without them. Any major changes noted on the shop drawings will be considered as extras and will be quoted accordingly as a schedule B which must be paid prior to production. The application of the product to the job site is the responsibility of the architect, designer, structural engineer, or contractor. No affixing hardware is supplied. Any custom products are made all sales final and cannot be exchanged or returned